|
Experimental data for solvent/polymer systems are often given as either (Polymer mass fraction, Pressure) or (polymer mass fraction, Temperature) curves.
This function lets the user trace the cloud point curve at fixed pressure as a function of polymer mass fraction while the solvent ration is constant.
Input
Argument
|
Type
|
Optional
|
Description
|
Feed
|
Range of double
|
No
|
A range of cells with the feed
|
Direction
|
C# : string
|
No
|
Direction in polymer mass fraction. Valid input are:
•Up •Down |
InitialMassfraction
|
C# : double
|
No
|
Polymer mass fraction where the curve starts.
|
Pressure
|
C# : double
|
No
|
Fixed pressure.
|
MinimumTemperature
|
C# : double
|
No
|
Is used when calculating the first point on the curve. Lowest possible temperature.
|
MaximumTemperature
|
C# : double
|
No
|
Is used when calculating the first point on the curve. Highest possible temperature.
|
Output
|
C# : string
|
No
|
Defines the output for each point on the curve. See here for more information.
|
Components
|
C# : string
|
No
|
Give a list of component names.
Only those components are used in the calculations.
See here for more information
|
Units
|
C# : string
|
No
|
Set the units used in this calculation.
See here for more information
|
Distribution
|
C# : object
(Expect a range of double)
|
Yes
|
Gives a range with the distribution of the polymer. Can for example be used if 2 flash calculations are liked as 2 separation tanks.
See here for more information
|
BlockMassfraction
|
C# : object
(Expect a range of double)
|
Yes
|
Sets the block mass fractions in a co-polymer.
See here for more information
|
ProjectSheet
|
C#: object
|
Yes
|
Lets the user set the project sheet to use.
See here for more information
|
AdvVLXE
|
C# : object
|
Yes
|
Advanced used. Reserved for use by VLXE.
See here for more information
|
AdvUser
|
C# : object
|
Yes
|
Advanced used. Reserved for the user. For example it can be used to force the function update.
See here for more information
|
Extra
This function is defined in C# as:
public Object[,] wT(Range Feed, string Direction, double InitialMassfraction, double Pressure, double MinimumTemperature, double MaximumTemperature, string Output, string Components, string Units, [In, Optional] object Distribution, [In, Optional] object BlockMassfraction, [In, Optional] object AdvVLXE, [In, Optional] object AdvUser)
|