|
This function lets the user link simulate a separation process by linking a series of PH flash's.
Input
Argument
|
Type
|
Optional
|
Description
|
Feed
|
Range of double
|
No
|
A range of cells with the feed
|
InitialTemperature
|
C# : double
|
No
|
Inlet temperature
|
InitialPressure
|
C# : double
|
No
|
Inlet pressure
|
PressureList
|
Range of double
|
No
|
Pressure for each flash unit
|
FlashTypeList
|
Range of double
|
No
|
FlashType for each flash unit. Valid input are:
•Auto: Stops when stability analysis shows that the system is stable •2: Will maximum look for 2 phases •3: Will maximum look for 3 phases |
DutyList
|
Range of double
|
No
|
Duty to add to each flash unit outlet
|
Output
|
C# : string
|
No
|
Defines the output. See here for more information.
|
Components
|
C# : string
|
No
|
Give a list of component names.
Only those components are used in the calculations.
See here for more information
|
Units
|
C# : string
|
No
|
Set the units used in this calculation.
See here for more information
|
Distribution
|
C# : object
(Expect a range of double)
|
Yes
|
Gives a range with the distribution of the polymer. Can for example be used if 2 flash calculations are liked as 2 separation tanks.
See here for more information
|
BlockMassfraction
|
C# : object
(Expect a range of double)
|
Yes
|
Sets the block mass fractions in a co-polymer.
See here for more information
|
ProjectSheet
|
C#: object
|
Yes
|
Lets the user set the project sheet to use.
See here for more information
|
AdvVLXE
|
C# : object
|
Yes
|
Advanced used. Reserved for use by VLXE.
See here for more information
|
AdvUser
|
C# : object
|
Yes
|
Advanced used. Reserved for the user. For example it can be used to force the function update.
See here for more information
|
Extra
This function is defined in C# as:
public Object[,] LinkedPHFlash(Range Feed, double InitialTemperature, double InitialPressure, Range PressureList, Range FlashTypeList, Range DutyList,
string Output, string Components, string Units, [In, Optional] object Distribution, [In, Optional] object BlockMassfraction, [In, Optional] object ProjectSheet, [In, Optional] object AdvVLXE, [In, Optional] object AdvUser)
|